Fujitsu Primergy RX300 S4

91
PRIMERGY RX300 S4 User's Guide
4.4.2 Startup Method for FloppyBuilder
Start up ServerStart and FloppyBuilder. Startup methods vary depending on the cases of creating on a
client server, or the server.
 For creation on a client computer
1 Set the PRIMERGY Startup Disc to the client computer.
Once "PRIMERGY Startup Disk" window appears, exit the window.
2 Click [Start] − [All Programs] − [Fujitsu Siemens ServerStart] – [ServerStart
(Start from DVD)].
ServerStart starts up and the [Welcome to ServerStart] window appears.
3 Click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.