95
PRIMERGY RX300 S4 User's Guide
4.4.5 Creating a DOS Diskette
For DOS data stored into the floppy disk, refer to the file in the following folder of the PRIMERGY
Startup Disc.
[CD/DVD drive]:\FreeDOS
To create a DOS diskette, prepare an unused floppy disk.
Start up ServerStart and confirm that the FloppyBuilder window is displayed.
1 Start up ServerStart and Click [FloppyBuilder].
2 Click [DOS Diskette].
3 Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The DOS diskette will be created automatically. When a message appears indicating that the disk
is created, click [OK] and eject the disk.
To Next Page
Loading...
