150
Chapter 6 Installing Internal Options
6.4.4 How to Install or Remove Memory Modules
1 Turn off the power and all peripheral devices, and pull the server out from the
rack to remove the top cover.
"6.2.1 How to Remove the Top Cover" (p.136)
2 Touch a metal part of the server to discharge static electricity.
3 Remove the fan duct.
"6.2.2 How to Remove the Fan Duct" (p.138)
4 Remove the memory board.
• After the server shutdown, memory modules remain very hot. Wait for a
sufficient period of time after the server shutdown before removing memory
modules. Failure to do so may cause burns.
Memory board
To Next Page
Loading...
