EasyManua.ls Logo

Fujitsu Primergy RX300 S4

Fujitsu Primergy RX300 S4
267 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
198
Chapter 7 Configuring Hardware and Utilities
LAN Settings submenu
Use this submenu to set the LAN when remote controlled by the RemoteControlService.
7.2.11 Security Menu
The Security menu sets the security options.
table: Items on the LAN Settings Submenu
Item Setting Description
DHCP Disabled (Initial value)
Enabled
Sets whether or not to acquire LAN IP address of
iRMC from the DHCP server.
Local IP address Sets the IP address of the iRMC.
Subnet mask Enter the subnet mask of the onboard LAN specified in [Local IP address].
Gateway address Enter the gateway address of the onboard LAN specified in [Local IP address].
Service LAN
Disabled
Enabled (Initial value)
Sets whether to enable Service LAN.
Service LAN Port
Service (Unchangeable)
Sets Service LAN.
This item appears when [Enabled] is selected for
[Service LAN].
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
Advanced Security Server ExitMain
Setup Password
System Password
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Load:
Setup Prompt:
Virus Warning:
Diskette Write:
Flash Write:
Not Installed
Not Installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[Standard]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
TPM (Security Chip) Setting
>

Table of Contents

Other manuals for Fujitsu Primergy RX300 S4

Related product manuals