190
Chapter 7 Configuring Hardware and Utilities
7.2.5 Advanced Menu
The [Advanced] menu sets the peripheral device and PCI device options.
table: Items on the Advanced Menu
Item Setting Description
Peripheral Configuration Configures the serial port, parallel port, etc.
"7.2.6 Peripheral Configuration Submenu" (p.191)
PCI Configuration Configures the PCI device.
"7.2.7 PCI Configuration Submenu" (p.193)
Advanced System
Configuration
Configures additional settings.
"7.2.8 Advanced System Configuration Submenu" (p.194)
Power On/Off Configures the power on/off settings.
"7.2.9 Power On/Off Submenu" (p.196)
IPMI Configures the integrated Remote Management Controller (iRMC) settings.
"7.2.10 IPMI Submenu" (p.197)
Reset Configuration Data • Yes
• No (Initial value)
Configures the initialization of the Extended
System Configuration Data (ESCD) that retains
system resources.
Multiprocessor
Specification
1.4 (Unchangeable) Sets the version of the used multiprocessor table.
The multiprocessor table is required when a
multiprocessor OS detects the multiprocessor
characteristics of the system.
Peripheral Configuration
PCI Configuration
Advanced System Configuration
Power On/Off
IPMI
Reset Configuration Data:
Multiprocessor Specification:
[No]
[1.4]
>
>
>
>
>
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
Advanced Security Server ExitMain
Setting items on this menu to incorrect values
may cause your system to malfunction.
Setup Warning
To Next Page
Loading...
