Fujitsu Primergy RX300 S4 - Installation Location of Expansion Cards

155
PRIMERGY RX300 S4 User's Guide
6.5.1 Installation Location of Expansion Cards
This server is equipped with seven PCI slots, and a maximum of seven expansion cards can be installed.
 PCI slot 1 is for SAS RAID Ctrl exclusive use.
 Slot 3 and slot 6 can be used as PCI-Express x8 slots in the following cases.
PCI slot 3: an expansion card is not installed in PCI slot 2.
PCI slot 6: an expansion card is not installed in PCI slot 5.
[Rear]
PCI slot 1
(
PCI-Ex
p
ress×4
)
PCI slot 2 (PCI-Express×4)
PCI slot 3 (PCI-Express×4)
PCI slot 4
PCI slot 5 (PCI-Express×4)
PCI slot 6 (PCI-Express×4)
PCI slot 7 (PCI-Express×4)
(PCI-X 64 bits 133MHz)
(SAS RAID Ctrl installed as a standard feature)