Fujitsu Primergy RX300 S4

187
PRIMERGY RX300 S4 User's Guide
7.2.3 Standard IDE Submenu
This submenu appears when selecting [Standard IDE] from the [Main] menu.
Use this submenu to set the type and operating mode for connected IDE devices.
table: Items on the Standard IDE Menu
Item Setting Description
PIO Mode PIO 4 Sets the data transfer mode.
DMA Mode UDMA 5 Sets the Direct Memory Access (DMA) data
transfer mode.
Firmware J.** Displays the firmware version.
PhoenixBIOS Setup Utility
Item Specific HelpStandard IDE: [DV-28S-V-(PM)]
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
Main
PIO Mode:
DMA Mode:
Firmware:
PIO 4
UDMA 5
J.**