Fujitsu Primergy RX300 S4 - How to Install an Internal Backup Device

170
Chapter 6 Installing Internal Options
6.7.3 How to Install an Internal Backup Device
1 Turn off the power and all peripheral devices, and pull the server out from the
rack to remove the top cover.
"6.2.1 How to Remove the Top Cover" (p.136)
2 Touch a metal part of the server to discharge static electricity.
3 Remove the fan duct.
"6.2.2 How to Remove the Fan Duct" (p.138)
4 Remove all fans and the fan cage.
1. Draw the fan's lever and raise it upwards to remove.
2. Draw the fixing lever of fan cage upwards, push the fan cage towards the device,
and raise it upwards to remove it.
Lever
Fan
Fan cage fix leve
r
(1)
(3)
(2)