154
Chapter 6 Installing Internal Options
6.5 Installing Expansion Cards
This section contains notes concerning types of expansion cards, various specific
expansion cards, and how to install them.
• Before installing an expansion card, turn off the server and all peripheral
devices, and unplug the power cables from the outlet ("1.4.3 Turning Off the
Server" (p.32)). Failure to do so may cause electric shock.
• The circuit boards and soldered parts of internal options are exposed and can
be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
• Expansion cards are susceptible to static electricity. Place them on conductive
pads or keep them in their packaging as long as they are not necessary.
To Next Page
Loading...
