206
Chapter 7 Configuring Hardware and Utilities
7.2.16 PCI Status Submenu
This submenu appears when selecting [PCI Status] from the [Server] menu.
Use this submenu to set whether or not to allow the use of the installed expansion card.
table: Items on the PCI Status Submenu
Item Setting Description
Slot 1
OK (Unchangeable) Sets whether or not to enable the use of the
expansion cards in PCI slot 1 to 7.
If "Failed" is displayed, replace the faulty
expansion card and then change the setting to
"OK".
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
PhoenixBIOS Setup Utility
Item Specific HelpPCI Status
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
Server
Slot 1:
Slot 2:
Slot 3:
Slot 4:
Slot 5:
Slot 6:
Slot 7:
[OK]
[OK]
[OK]
[OK]
[OK]
[OK]
[OK]
To Next Page
Loading...
