U41057-J19-Z146-1-76 July 2004 02–TX150S2–33
Installation and initial operation Initial operation and operating
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: P:\02-systemeinheiten\TX150S2\TX150S2-e\TX150S2-e.k02
Indicators on the drives
CD-ROM/DVD drive/CD burner indicator
lights green when the drive is being accessed.
Floppy disk drive indicator
lights green when the floppy disk drive is being accessed.
Global Error indicator (orange)
Is dark, when the system is OK. No critical event or event indicating service
requirement has occurred.
Blinks orange, when a critical event has occurred or a pre-failure event has
been detected. Users can check BIOS setup, system and event log for event
details or use ServerView. The indicator blinks also in standby mode.
Lights orange, when a prefailure event has been detected. Users can check
system and event log for event details or use ServerView. The indicator lights
also in standby mode.
After power-off the indicator is activated after a reload if the event is still
critical.
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing the ID
button. To deactivate, press again the ID button.
The indicator can be selected also via ServerView and his status is also
reported to ServerView.
!
To Next Page
Loading...
Need help?
General