EasyManua.ls Logo

Fujitsu PRIMERGY TX200 S2 - Page 102

Fujitsu PRIMERGY TX200 S2
317 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
102
Chapter 3 OS Installation Using ServerStart
Starting Installation
1 On the PXE server, start up ServerStart.
If ServerStart has already been started, you do not have to restart it. If it is not started, click
[Start] [Programs] [Fujitsu ServerStart] [ServerStart].
The [Welcome to ServerStart] window appears.
2 Click [Click here to prepare an operating system installation for a PRIMERGY
Server].
The [Prepare the installation of an operating system for PRIMERGY Servers] window appears.
3 Click [Creation of ServerStart Configuration file for the installation of an
Microsoft Windows Operationg System].
The [Microsoft Windows Operating System Installation] window appears.
4 Click the OS to install.
The [Preparing the Installation] window appears.
If a configuration file has already been created, go to Step 6.
5 Set items in wizards to create a configuration file.
Refer to "3.2.2 Configure Settings in Wizards" (pg.79). Set items in wizards and save the
configuration file.
Exiting a wizard returns to the preconfiguration mode window.
6 Click [Click here to initiate the Remote Installation Process].
The [Remote Installation Target Server] window appears.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX200 S2

Related product manuals