Fujitsu PRIMERGY TX200 S2 User Manual

103
PRIMERGY TX200 S2 User’s Guide
3
OS Installation Using ServerStart
7 Configure remote installation.
1. Enter the "MAC address of the target system".
2. Select the "PRIMERGY model type".
3. Specify the "Configuration file" containing the installation settings.
8 Click [Start Installation].
Installation starts. All disk contents on the target server are deleted.
The [ServerStart Boot Manager] window appears.
Check that the status is "Waiting for client".

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English