Fujitsu Scan Snap S1300i User Manual

Actions (for Windows Users)
176
For details about the procedure to save scanned images to mobile devices through automatic
linkage, and using or without using the Quick Menu, refer to the following:
z Automatic Linkage (J page 177)
z Using the Quick Menu (J page 179)
z Without Using the Quick Menu (J page 182)
HINT
z The following message appears when you first launch [Scan to Mobile]. Click the [OK] button to open
the [Scan to Mobile - Basic] dialog box.
In the [Scan to Mobile - Basic] dialog box, enter a password to connect to the mobile device.
For details about other setting items, refer to the Scan to Mobile Help.
z The Scan to Mobile icon appears on the taskbar when the file is saved to the mobile device.
The Scan to Mobile icon is displayed in the menu that appears when you click on the taskbar.
The Scan to Mobile icon shows the communication status between the computer and the mobile
device. The appearance of the icon changes according to the communication status as shown below.
Status Scan to Mobile icon
Waiting
Standby
Sending
Sending error
Rejected

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power