Fujitsu Scan Snap S1300i User Manual

Cloud Services (for Mac OS Users)
402
3. Change the settings for [Scan to Salesforce Chatter] (If you do not want
to change any settings, go to step 4.).
1. Click the [Application Settings] button.
DThe [Scan to Salesforce Chatter - Options] window appears.
2. Change the settings.
For details about the [Scan to Salesforce Chatter - Options] window, refer to the
ScanSnap Manager Help.
3. Click the [OK] button to close the [Scan to Salesforce Chatter - Options] window.
4. Click the [Apply] button.
5. Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
ATTENTION
If the computer is shared with other users, do not set your information in [User Name],
[Password] and [Security Token]. Otherwise, other users will be able to log into Salesforce
automatically.
It is recommended to set only [User Name] and [Security Token] in this window, and type in the
password every time.

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power