Furuno GP-170 - 1. Operational Overview; 1.1 Control Panel and Key Functions

1-1
1. OPERATIONAL OVERVIEW
1.1 Controls
The keys are arranged according to the function.
No. Control
Function
Menu screen Display mode
1 MENU/ESC • Closes the menu.
• Quits current operation.
• Opens the menu.
• Quits current operation.
2 NU/CU ENT Confirms a selection. • Switches the orientation mode
between north-up and course-up
on the plotter display.
• Confirms a selection then closes
the setting window.
3 Cursorpad • S or T: Selects the menu
item.
• W: Goes back one layer in
multi-layer menu.
• X: Goes forward one layer in
multi-layer menu.
• Shifts display or cursor on the
plotter display.
• Switches display on the integrity
display.
4 LIST • Opens the list.
• Switches the list (any display → mark list → route list → station list
(requires the internal beacon receiver) → any display). Long-press to
switch the list in reverse order.
5
(Right-click)
– Opens the context menu on the plotter
display.
MENU
ESC
NU/CU
ENT
LIST
DISPLAY
ROUTE
GO TO
MOB
MARK
12
3
4
EVENT
5
PLOT
ON/OFF
6
78
9
ZOOM
IN
CENTER
ZOOM
OUT
ACK
DELETE
CURSOR
ON/OFF
0
BRILL
Operation keys
Function keys
10
10
18
18
1
1
3
3
4
4
2
2
5
5
6
6
7
7
8
8
9
9
11
11
12
12
13
13
14
14
16
16
17
17
MENU
ESC
NU/CU
ENT
LIST
DISPLAY
ROUTE
GO TO
MOB
MARK
12
3
4
EVENT
5
PLOT
ON/OFF
6
78
9
ZOOM
IN
CENTER
ZOOM
OUT
ACK
DELETE
CURSOR
ON/OFF
0
BRILL
19
19
15
15