Furuno GP-170 - How to Change the Route Direction; How to Copy the Route

4. ROUTES
4-11
4.2.6 How to change the route direction
You can change the direction to travel a route.
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [2 Route Registration] to show the route list.
3. Use the cursorpad (S or T) to select the route to change its direction then press
the NU/CU ENT key to display the [Edit] window. This window can be opened as
the context menu (see "On the plotter display" in paragraph 4.2.1).
4. Select [5 Forward/Reverse].
5. Select [1 Forward] or [2 Reverse].
[Forward]: Follow the waypoints in the order they were en-
tered.
[Reverse]: Follow the waypoints in reverse order. The arrows on the route point in
the direction to follow the route (see the illustration on page 5-1).
6. Press the MENU/ESC key to close the main menu.
The ( ) icon is displayed on the route for which [Reverse] is selected.
4.2.7 How to copy the route
The copy feature lets you save a registered route under a new route number. This is
useful for creating a new route with parts of a previously registered route.
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [2 Route Registration] to show the route list.
3. Use the cursorpad (S or T) to select the route to copy then press the NU/CU ENT
key to display the [Edit] window. This window can be opened as the context menu
(see "On the plotter display" in paragraph 4.2.1).
[Reverse]
is selected.