Furuno GP-170 - How to Delete a Waypoint from a Route

4. ROUTES
4-9
How to restore the skipped waypoint
To restore the skipped waypoint if you have not passed it, do the following:
1. Press the CURSOR ON/OFF key to turn the cursor on.
2. Put the cursor on any route line of the route which contains the skipped waypoint
then press the key to open the context menu.
3. Select [6 WPT List]. The ( ) icon is displayed on the skipped waypoint.
4. Use the cursorpad (S or T) to select the skipped waypoint then press the NU/CU
ENT key.
5. Select [8 Skip].
6. Select [1 Off].
7. Press the MENU/ESC key to close the context menu.
4.2.4 How to delete a waypoint from a route
How to erase a waypoint from the context menu
1. Press the CURSOR ON/OFF key to turn the cursor on.
2. Use the cursorpad to select the waypoint to delete then press the key to open
the context menu.
3. Select [0 Delete].
Skipped
waypoint