Furuno GP-170 - How to Set the Track Color; How to Erase the Track

2. PLOTTER DISPLAY OVERVIEW, TRACK
2-8
2.3.3 How to set the track color
You can select the track color as follows:
1. Press the MENU/ESC key to open the main menu.
2. Select [2 Track/Mark] then [2 Track Color].
3. Select the track color.
4. Press the MENU/ESC key to close the main menu.
How to change the color of selected track
1. Put the cursor on the track.
2. Press the key to open the context menu.
3. Select [1 Change Color].
4. Select the color to change.
5. Press the MENU/ESC key to close the context menu.
2.3.4 How to erase the track
How to erase all tracks from the main menu
1. Press the MENU/ESC key to open the main menu.
2. Select [2 Track/Mark] then [9 Erase Track].
3. Select [1 Erase Track]. The confirmation message appears.
4. Select [1 Yes].
5. Press the MENU/ESC key to close the main menu.
How to erase all tracks from the context menu
1. Put the cursor on a track.
2. Press the key to open the context menu.
3. Select [2 Erase All]. The confirmation message appears.
4. Select [1 Yes].