9. OTHER FUNCTIONS
9-10
5. Enter the satellite number with the numeric
keys (setting range: 120 to 138).
6. Move the cursor to [Enter] then press the NU/
CU ENT key.
7. Press the MENU/ESC key to close the main
menu.
Beacon
1. Press the MENU/ESC key to open the main menu.
2. Select [8 System Setting] then [6 Beacon/SBAS].
3. Select [3 Beacon Station].
4. Select [1 Auto], [2 Set Parameter] or [3 Select
Station ID].
[Auto]: Automatically selects the nearest station
among available stations. Go to step 8.
[Set Parameter]: Selects the station with entering the frequency or selecting the
bit rate. Go to step 5.
[Select Station ID]: Selects the station from the station list (requires the internal
beacon receiver). Go to step 7.
5. Select [1 Frequency] or [2 Bit Rate].
6. For [Frequency]
, enter the frequency with the numeric keys and move the cursor
to [Enter] then press the NU/CU ENT key.
For [Bit Rate]
, select the bit rate from five options.
Go to step 8.
7. Use the cursorpad (S or T) to select the station ID then press the NU/CU ENT
key.
8. Press the MENU/ESC key to close the main menu.
9.4.3 How to open the station data
Station database
Note: This menu requires the internal beacon receiver.
1. Press the MENU/ESC key to open the main menu.
2. Select [8 System Setting] then [6 Beacon/SBAS].
To Next Page
Loading...
