Furuno GP-170 - 5.2 Cancelling a Set Destination

5. DESTINATION
5-3
5.1.4 How to set a registered route as a destination
You can set a registered route as a destination.
From the main menu
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [7 Goto (Route Number)].
3. Enter the route number to set as a destination with the numeric keys.
4. Move the cursor to [Enter] then press the NU/CU ENT key.
5. Press the MENU/ESC key to close the main menu.
From the context menu
1. Press the CURSOR ON/OFF key to turn the cursor on.
2. Put the cursor on any route line of the route as a destination.
3. Press the key to open the context menu.
4. Select [1 GoTo/Cancel].
5.2 How to Cancel a Destination
To cancel a destination, do one of the following three methods.
5.2.1 How to cancel a destination with the GO TO key
1. Press the CURSOR ON/OFF key to turn the cursor on.
2. Use the cursorpad to place the cursor on a destination.
3. Press the GO TO key.
5.2.2 How to cancel a destination from the main menu
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [8 Goto Cancel].
3. Press the MENU/ESC key to close the main menu.