7. DISPLAYS
7-6
7.4 Data Display
The data display shows the navigation data. Use the cursorpad (W or X) to change
the data to display.
How to customize the display
You can arrange the data to display and show the data in the order desired. Availability
of data depends on the sensors connected.
1. Press the MENU/ESC key to open the main menu.
2. Select [8 System Setting] then [2 Plotter].
Own ship’s position*
Speed over ground
Estimated time of arrival
at the final destination
Range
Press the ◄ or ► key.
Own ship’s position*
Course over ground
Heading
Route total distance
Time to go to destination
Estimated time of
arrival and planned
estimated time of arrival
at destination
*: Shows the ship’s position adjusted with the setting position offset
based on the selected datum (refer to paragraph 9.3.5).
To Next Page
Loading...
