Furuno GP-170 - How to Enter a Mark at the Cursor Position

3. MARKS
3-2
2. Select [2 Track/Mark] then [5 Mark Line].
3. Select the line type.
4. Press the MENU/ESC key to close the main menu.
When continuously entering marks by the method described in paragraph 3.1.2, the
marks are connected with the selected line.
Mark line color
You can select a mark line color from seven colors.
1. Press the MENU/ESC key to open the main menu.
2. Select [2 Track/Mark] then [6 Line Color].
3. Select the color.
4. Press the MENU/ESC key to close the main menu.
3.1.2 How to enter a mark at the cursor position
1. Press the CURSOR ON/OFF key to turn the cursor on.
2. Use the cursorpad to place the cursor on the location for a mark.
3. Press the MARK EVENT key to put the mark. This mark is named with the young-
est unused mark number (for example, "POINT0001"), and saved to the mark list.
3.1.3 How to enter a mark from the mark list
At the cursor position
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [1 Mark Registration].
• [None]: None • [Solid]:
• [Dash]: • [Alternate Dash]: