Furuno GP-170 - 4.3 Erasing Routes

4. ROUTES
4-12
4. Select [7 Route Copy]. "ROUTE1" is copied in the illustration below.
5. Edit the route as appropriate (see section 4.2).
6. Press the MENU/ESC key to close the main menu.
4.3 How to Erase a Route
How to erase a route from the context menu
1. Press the CURSOR ON/OFF key to turn the cursor on.
2. Put the cursor on any route line of the route to delete then press the key to
open the context menu.
3. Select [2 Delete].
How to erase a route from the route list
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [2 Route Registration].
3. Use the cursorpad (S or T) to select the route to delete then press the NU/CU
ENT key.
4. Select [2 Delete].
5. Press the MENU/ESC key to close the main menu.
[ROUTE1] is
copied here.