Furuno GP-170 - How to Temporarily Deselect a Waypoint in a Route

4. ROUTES
4-8
12. To change the staying time, select [5 STAY], then enter
the staying time at the waypoint with the numeric keys.
13. Use the cursorpad to select [Enter] then press the NU/
CU ENT key.
14. To change the SOG, select [6 SOG], then en-
ter the speed with the numeric keys.
15. Use the cursorpad to select [Enter] then
press the NU/CU ENT key.
16. To change the departure time, select [7 DEP
TIME], then enter the date and time departing from the waypoint with the numeric
keys
17. Use the cursorpad to select [Enter] then press the NU/CU ENT key.
18. Press the MENU/ESC key to close the context menu.
4.2.3 How to temporarily deselect a waypoint in a route
You can temporarily deselect an unnecessary waypoint from a route. Using the route
created in the illustration shown below as an example, deselect "POINT0003".
If you reconstruct the route without "POINT0003" it would look like the illustration be-
low.
1. Press the CURSOR ON/OFF key to turn the cursor on.
2. Use the cursorpad to select the waypoint in the route to skip then press the
key. The context menu opens.
3. Select [8 Skip].
4. Select [2 On].
5. Press the MENU/ESC key to close the context menu.
POINT0001
POINT0005
POINT0002
POINT0003
POINT0004
POINT0001
POINT0005
Skipped point
POINT0002
POINT0004