1. OPERATIONAL OVERVIEW
1-9
3. Select an option.
4. Press the MENU/ESC key to close the main menu.
1.6 List Overview
The LIST key displays the mark list, route list and station list, in the sequence shown
below.
How to save position in a list
1. Press the MENU/ESC key to open the main menu.
2. Select [8 System Setting] then [2 Plotter].
3. Select [7 List Number].
4. Select [1 Keeping] or [2 Not Saved].
[Keeping]: Saves position in lists.
[Not Saved]: No. 0001 is always displayed at the top of the
list.
5. Press the MENU/ESC key to close the main menu.
Any display
Mark List
Route List
Station List
: Short-press the LIST key
: Long-press the LIST key
(Requires internal beacon receiver.)
To Next Page
Loading...
