9. OTHER FUNCTIONS
9-20
9.10 How to Set the Demo Mode
A demo mode, which shows internally generated navigation data, is provided to ac-
quaint you with the features of the GP-170. You can set the demo mode as follows:
1. Press the MENU/ESC key to open the main menu.
2. Select [8 System Setting] then [8 Demo].
3. Select [1 Parameter].
4. Enter each setting with the numeric keys refer to the left figure.
[Date]: Set the starting date and time in UTC.
[Position]: Set the starting position. To change the coordinate, select "N" or "E"
then press one of keys from 0 to 9.
[1. Direction]: Set the direction for translatory movement.
[2. SOG]: Set the speed for translatory movement in kn.
[3. Direction]: Select the direction for rotary motion from [CW] (clockwise) and
[CCW] (counterclockwise).
[4. Radius]: Set the radius for rotary motion in NM.
[5. Angular Speed]: Set the angular speed for rotary motion.
5. Move the cursor to [Start] then press the NU/CU ENT key. The equipment re-
starts. The icon (simulation) appears at the top left corner of the screen.
Note: To cancel the demo mode, turn the power off and on.
To Next Page
Loading...
