4. ROUTES
4-5
7. Select [9 Add] to enter the waypoint.
8. Repeat steps 4 to 7 to enter all waypoints.
9. Press the MENU/ESC key to complete the route and close the main menu.
By entering L/L
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [2 Route Registration].
3. With the cursor on the [New] line, press the NU/CU ENT key.
4. Select [2 Input L/L].
5. Enter latitude and longitude for the first
waypoint with the numeric keys. (To
change the coordinate, select "N" or
"E" then press one of keys from 0 to 9.)
6. Move the cursor to [Enter] then press
the NU/CU ENT key.
7. If necessary, change the settings of the route.
8. Select [9 Add] to enter the waypoint.
9. Repeat steps 4 to 8 to enter all waypoints.
10. Press the MENU/ESC key to complete the route and close the main menu.
From the mark list
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [2 Route Registration].
3. With the cursor on the [New] line, press the NU/CU ENT key.
4. Select [3 From Mark List] to show the mark list.
5. Use the cursorpad (S or T) to select the mark to use for the route.
6. Press the NU/CU ENT key.
7. If necessary, change the settings of the route.
8. Select [9 Add] to enter the waypoint.
9. Repeat steps 4 to 8 to enter all waypoints.
10. Press the MENU/ESC key to complete the route and close the main menu.
To Next Page
Loading...
