www.gateway.com
65
Memory card types
The memory card reader supports the following card types:
Each slot is assigned a different drive letter (for example, the E: and F: drives) so data can be
transferred from one memory card type to another.
Using a memory card
To insert a memory card:
1 Insert the memory card into the memory card slot as indicated in the previous table.
2 To access a file on the memory card, click Start, then click My Computer. Double-click
the drive letter (for example, the E: drive), then double-click the file name.
To remove a memory card:
• Wait for the memory card reader access indicator to stop blinking, then pull the memory
card out of the slot.
Card Type Slot Insert
Secure Digital
™
left Label facing up
MultiMediaCard
™
left Label facing up
SM (SmartMedia
™
) left Label facing down (gold
contact area facing up)
Memory Stick
®
left Label facing up
Memory Stick PRO
™
left Label facing up
xD left Label facing up
CompactFlash
®
right Label facing up
IBM Microdrive
™
right Label facing up
Caution
To avoid memory card damage or errors while using a memory card, insert only
one memory card in a slot at a time.
Caution
Do not remove the memory card or turn off the computer while the memory
card reader access indicator is blinking. You could lose data. Also, remove the
memory card from the reader before you turn off the computer.
Important
Do not use the remove hardware icon in the taskbar to remove the memory
card.
8511879.book Page 65 Thursday, February 15, 2007 10:39 AM
To Next Page
Loading...
Need help?
General
