TruVision DVR 40 User Manual 43
Table 8: List of dwell time options
Options Description
Off The live display will not automatically switch.
5S The live display will automatically switch after 5 seconds.
10S The live display will automatically switch after 10 seconds.
20S The live display will automatically switch after 20 seconds.
30S The live display will automatically switch after 30 seconds.
For example: If a 16-channel TVR 40 has the 4-screen live mode and the 20-second dwell time
selected, the TVR 40 will cycle four camera displays every 20 seconds.
5. Go to the Audio check box. You can select to hear and record audio from the selected camera.
Press Enter or left-click the mouse to enable () or disable audio.
6. Go to Alarm Aux Out to select which monitor should work as an alarm spot monitor. If there is an
alarm, the video will pop up on this monitor.
7. Go to the Alarm Dwell Time edit box. This is the time delay before the alarm video appears on
screen. If there is more than one alarm, there is also the delay switching between the alarm
videos. Select the time delay required: Off, 3, 4, 5, or 10 seconds.
8. Go to Display Layout. Select the sequence in which the cameras will be displayed in the main
monitor. Cameras are sequenced in numeric order by default. Each numbered square on-screen
corresponds to that numbered camera. Press the number button that corresponds to the camera
you want displayed first. Continue for each camera. The sequence order is displayed in the bar
underneath.
9. When complete, go to OK and press Enter or left-click the mouse to accept all the changes and
return to the Display menu.
10. When you have made all the changes required in the Display menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu. Press the Menu button to
return to live mode.
To Next Page
Loading...
