System properties
Follow the instruction to update the system properties.
ActionStep
Open the system properties Edit dialog box.1
In the Component types list, click Valves and pumps2
Select the Loop valve (V9-L) or Loop valve (V9H-L) check box in the Compo-
nent selection list. Then click OK.
3
System settings
The flow rate for Loop wash can be set.
DescriptionInstruction name
Sets the flow rate used during Loop wash.
Note:
The flow rate should not exceed 10 ml/min if narrow inlet
tubing (i.d. 0.75 mm) is used.
Loop wash settings
ÄKTA avant User Manual 29035184 AE 127
4 Optional instrument modules
4.7 Loop valve
To Next Page
Loading...
