GE AKTA avant - Maintenance When Required

7.6 Maintenance when required
Introduction
This section gives instructions for maintenance activities to be performed when required.
In this section
This section contains the following subsections:
See pageSection
2887.6.1 Clean the instrument externally
2897.6.2 Perform System CIP
2977.6.3 Perform Column CIP
3017.6.4 Clean built-in fraction collector
3047.6.5 Clean Fraction collector F9-R
3057.6.6 Storage of the pH electrode
3077.6.7 Clean the pH electrode
3117.6.8 Regenerate dried out pH electrode
3127.6.9 Clean pump head check valves
3157.6.10 Clean pump flow restrictors
3177.6.11 Wipe off excess oil from the pump head
3187.6.12 Clean the Conductivity flow cell
ÄKTA avant User Manual 29035184 AE 287
7 Maintenance
7.6 Maintenance when required