2.5 Instrument display
Introduction
The Instrument display is located on the front of the ÄKTA avant instrument. The Instru-
ment display shows the current state of the system. The Instrument display can also be
used to view detailed information about an ongoing method run and to view network
settings. The Pause and Continue buttons of the Instrument display can be used to
control an ongoing method run.
This section describes the location and function of the Instrument display.
Location and illustration
The following illustration shows the location and a detailed view of the instrument display.
DescriptionPart
System name1
Information area. This example shows the State window.2
Continue button. Tap to continue the run after, for example, a pause.3
Pause button. Tap to pause a run.4
The name of the current system state. The state is shown even if another
message or view is shown in the information area.
5
Lock/Unlock indicator. Indicates if the Pause and Continue buttons are
locked or unlocked. Locking is set in UNICORN in System Control.
6
ÄKTA avant User Manual 29035184 AE 37
2 The ÄKTA avant instrument
2.5 Instrument display
To Next Page
Loading...
