GE AKTA avant - System Specifications

9.1 System specifications
Technical specifications
DataParameter
Benchtop system, external computerSystem configuration
UNICORN™ 6.3.2 or later versionControl system
EthernetConnection between PC and instrument
860 x 710 x 660 mmDimensions (Length x Depth x Height)
116 kgWeight (excluding computer)
100-240 VAC, 50-60 HzPower supply
800 VAPower consumption
IP 21, wet side IP 22Enclosure protective class
ÄKTA avant 25:Tubing and connectors
•
Inlet: FEP tubing, inner diameter (i.d.) 1.6 mm,
Tubing connector 5/16″ + Ferrule (yellow), 1/8″
•
Pump to Injection valve: PEEK tubing, i.d.
0.75 mm, Fingertight connector, 1/16″
•
After Injection valve: PEEK tubing, i.d. 0.50 mm,
Fingertight connector, 1/16″
•
Outlet and waste: ETFE tubing, i.d. 1.0 mm,
Fingertight connector, 1/16″
ÄKTA avant 150:
•
Inlet: FEP tubing, i.d. 2.9 mm, Tubing connector
5/16″ + Ferrule (blue), 3/16″
•
After pumps: PEEK tubing, 1.0 mm i.d., Finger-
tight connector, 1/16″
•
Outlet: FEP o.d.1/8″, i.d. 1.6 mm, Tubing connec-
tor 5/16″ + Ferrule (yellow), 1/8″
•
Waste: ETFE tubing, i.d. 1.0 mm, Fingertight
connector, 1/16″
422 ÄKTA avant User Manual 29035184 AE
9 Reference information
9.1 System specifications