ActionStep
Connect a piece of tubing from the bottom of the Superloop to:3
•
port LoopF on the Injection valve
or
•
the F port corresponding to the connected E port, e.g., 1F, on the Loop
valve
Fill the Superloop using a syringe
Follow the instruction below to fill the Superloop using a syringe.
ActionStep
Check if the system is in state Ready.1
•
If yes: The Injection valve is in position Manual Load per default. Continue
to step 3.
•
If no: Continue to step 2 to position the valve.
ÄKTA avant User Manual 29035184 AE 195
5 Operation
5.7 Sample application
5.7.2 Sample application using a Superloop
To Next Page
Loading...
