Illustration convention
In the valve illustrations below, the following convention is used to point out the location
of the ports on the valve head. Loop valve V9-L is used as an example.
3E
3F
V9-L
1
E
2
E
4
E
5
E
5
F
4
F
2
F
1
F
E
F
•
Ports located on the valve head rim are indicated outside
the black ring (e.g., 1E, 2E, etc.).
•
Ports located on the pivot part of the valve head are in-
dicated on the inside of the black ring (e.g., 3E and 3F).
•
Ports located on the valve head front are indicated by
an arrow (e.g., E and F).
Description of standard modules
The following modules are installed in the instrument when delivered.
DescriptionModule
A high precision pump, which delivers buffer in
purification runs.
System pump A P9 A or P9H A
For further information, refer to Section 3.1 Pumps,
on page 56.
20 ÄKTA avant User Manual 29035184 AE
2 The ÄKTA avant instrument
2.1 Overview illustrations
To Next Page
Loading...
