Process Picture
The Process Picture displays the current flow path, run parameters and real-time data
from monitors during a run. It also allows manual interactions with the system.
Tubing colors indicate flow path states, as shown in the following illustration and de-
scribed in the following table.
Modules without a fixed place in the system are shown in a panel below the process
picture (modules are called components in the process picture).
IndicationColor
Open flow path with flow.Green
Closed flow path or an open path without flow.Grey
Syringe port in loop open for manual injection.Blue
234 ÄKTA avant User Manual 29035184 AE
5 Operation
5.9 Create a method and perform a run
5.9.3 Monitor the run
To Next Page
Loading...
