GE AKTA avant - Page 242

Automatic evaluation
The system automatically generates a report when the test is finished. The report can
be printed in two ways:
•
It is recommended to select Save the report to file in the Evaluation Procedures
page of the Start Protocol dialog box when starting the test. The report is saved in
the folder Temp in your UNICORN installation folder. For example
C:\Program Files\GE Healthcare\UNICORN\UNICORN 7.0\Temp.
•
If the option Print report was selected in the Evaluation Procedures page of the
Start Protocol dialog box when starting the test, the report is also automatically
printed on the system printer. Refer to UNICORN Administration and Technical Manual
for information on how to install a printer.
Print the report and check the status of the tests. For each of the tests the report states
"The test passed" or "The test failed".
The fraction collector test is evaluated manually and no report is generated.
Note:
242 ÄKTA avant User Manual 29035184 AE
6 Performance tests
6.1 General performance test actions