Connect new tubing
ActionStep
Disconnect the used tubing.1
Cut the new tubing to desired length.2
Connect the new tubing according to the previous illustration.3
Fit all pieces of tubing into the tubing holders on the pump modules.4
Prime the rinsing systems
Before usage, prime the pump rinsing system tubing. Refer to
Section 7.3.1 Change pump rinsing solution, on page 273 for detailed instructions.
ÄKTA avant User Manual 29035184 AE 353
7 Maintenance
7.8 Replacement procedures
7.8.9 Replace pump rinsing system tubing
To Next Page
Loading...
