GE AKTA avant - Page 430

DataParameter
ÄKTA avant 25: 0.1 to 20 000 mlFraction volumes
ÄKTA avant 150: 1 to 20 000 ml
ÄKTA avant 25: 142 µlDelay volume, with pH electrode and
flow restrictor off-line (UV – Outlet valve)
ÄKTA avant 150: 535 µl
Built-in fraction collector
DescriptionItem
Up to 576Number of fractions
•
3, 5, 8, 15, 50 ml tubes
•
250 ml bottles
•
Deep well plates: 96 / 48 / 24
Vessel types
Automatic recognitionVessel type selection
0.1 to 250 mlFraction volumes
ÄKTA avant 25: Automatic, DropSync or accumulatorSpillage-free modes
ÄKTA avant 150: Automatic or accumulator
Covered vessels and climate control (settable 6°C to 20°C)Protection of fractions
NoOrganic solvents
ÄKTA avant 25: 518 µlDelay volume, with pH electrode and
flow restrictor off-line
(UV – dispenser head)
ÄKTA avant 150: 1807 µl
Fraction collector F9-R, 2nd
DataParameter
Up to 175Number of fractions
Tube outer diameter: 12, 18 or 30 mmVessel types
Tube length: 50 to 180 mm
0.1 to 50 mlFraction volumes
430 ÄKTA avant User Manual 29035184 AE
9 Reference information
9.2 Module specifications