DescriptionInstruction name
Is used to adjust the conductivity values to a reference
temperature in order to compare conductivity values
between runs that have been performed at different
temperatures.
Cond temp condensation
Setting the compensation factor to 0% turns this func-
tion off.
Is used to adjust the conductivity values for the second
conductivity monitor to a reference temperature in order
to compare conductivity values between runs that have
been performed at different temperatures.
Cond 2nd temp condensa-
tion
Setting the compensation factor to 0% turns this func-
tion off.
462 ÄKTA avant User Manual 29035184 AE
9 Reference information
9.7 System settings
9.7.2 System settings - Conductivity
To Next Page
Loading...
