DescriptionInstruction name
Only for Fraction collector F9. Cassette configuration
is set to either automatic or manual:
Cassette configuration
•
Automatic: the fraction collector automatically de-
tects the cassette types present in the fraction col-
lector.
•
Manual: The fraction collector content is manually
set.
Is used when collecting fractions with the second Frac-
tion collector.
Fractionation frac 2
Ends the fractionation after the set delay volume for the
second Fraction collector (specified in System Set-
tings:Tubing and Delay volumes) has been collected.
The outlet valve is then turned to position Waste.
Note:
If Stop fractionation frac 2 is issued when both Frac-
tionation frac 2 and Peak fractionation frac 2 are ac-
tive, fractionation is stopped after the set delay volume
has been collected. The Outlet valve V9-O or V9H-O re-
mains in position Outlet 10 / Frac 2 and peak fractiona-
tion in the second Fraction collector continues.
Stop fractionation frac 2
Enables collection of only those peaks that fulfill the
conditions set in the Peak fractionation parameters
instruction.
Peak fractionation frac 2
Ends the peak fractionation in second Fraction collector
after the set delay volume (specified in System Set-
tings:Tubing and Delay volumes) has been collected.
The outlet valve is then turned to position Waste.
Stop peak fractionation
frac 2
Sets fraction numbers to restart from 1 for the second
Fraction collector. The restart occurs when the instruc-
tion is issued. The instruction overrides the continuous
numbering mode if Fractionation numbering mode
frac 2 is set to Continue in System Settings.
Reset frac number frac 2
ÄKTA avant User Manual 29035184 AE 485
9 Reference information
9.8 Using Manual instructions
9.8.4 Manual instructions - Fraction collection
To Next Page
Loading...
