DescriptionInstruction name
Stops the volume counter function. The counted volume
is stored in the memory and can be recalled with the
instruction Hold counted volume. The counted volume
can also be recalled in following runs and is stored until
a new Stop volume count instruction is issued.
Stop volume count
This instruction is best used in combination with Watch
instructions.
Sets the system to Hold. The system will remain in the
state Hold until the accumulated volume reaches the
volume stored by the instructions Start volume count
/ Stop volume count.
Hold counted volume
Defines the flow from which the volume base is calcu-
lated. When set to Automatic, the position of the injec-
tion valve determines if the system flow or the sample
flow is used.
Method progressing flow
494 ÄKTA avant User Manual 29035184 AE
9 Reference information
9.8 Using Manual instructions
9.8.7 Manual instructions - Advanced
To Next Page
Loading...
