GE Hydran M2-X - Page 147

Page 147
Hydran* M2-X Instruction Manual
MA-029 Rev. 1.0, 30-Jul-18
• Inductive load: 1.5 A (ac/dc)
Communications
Ports
• One RS-232 port for local laptop computer connection
• One RS-485 port for connection to local Hydran network or
remote communication
Optional
Communications
Port
1 of the following to be specified when ordering:
• Integrated serial to Ethernet 10/100BaseT; Part Number
17046
• Integrated Fiber Optic Ethernet 100BaseFX, ST Multimode;
Part Number 18321
• Integrated dial-up Modem V.92/56k; Part Number 16868
Optional I/O
Up to 4 of the following to be specified when ordering:
• General-purpose 4–20 mA analog input; 2,000 V RMS
isolation; Part Number 16528
• Analog 4–20 mA output; 500- maximum loading; 2,000 V
RMS isolation; Part Number 16529
• Dual digital inputs for dry contacts; internal wetting 24 VDC;
2,000 V RMS isolation; Part Number 17464
MISCELLANEOUS
Enclosure
• Type NEMA 4X (IP56)
• Cast aluminum, powder pint, white
• External dimensions: 315 mm long x 219 mm wide x 196 mm
high (12.4 x 8.63 x 7.72 in)
For details, see Section A.2.1.
Electronic
Modules
Totally encased CPU and I/O electronics
Sensor Heating
Heater plate to maintain sensor between 15 and 65 °C (59 and
149 °F) in normal transformer operating conditions to force oil
convection
Oil Temperature
• Oil at the valve: -40 to +90 °C (-40 to +194 °F)
• Oil at the valve up to 105 °C (221 °F), with optional finned,
high-temperature adaptor, Part Number 18065
• Possible short-duration exposure: Oil up to 120 °C (248 °F)
Oil Pressure
• Vacuum-resistant sensor; 0–700 kPa (0–100 psia)
Power Supply
• 90-132 Vac, 180-264 Vac, 47-63 Hz, 650 VA maximum
EMC
Compatibility
Meets standards ENV 50204, EN 55022, IEC 60255-22-1, EN
61000-3-2, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN
61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11