GE LOGIQ 400 - Page 397

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL

RENEWAL PARTS
6–267
REV 9
6–6–4 Procedures (continued)
(B) Connecting Cables
15. Connect the CB24N Cable with the P24A connector on the Mother Assy. Refer to ILLUSTRATION 6–150.
16. Connect the CB5N Cable with the P5A connector on the Mother Assy. Refer to ILLUSTRATION 6–150.
REMOVING CABLES
ILLUSTRATION 6–150
17. Pass another side of cables through the opening of Frame forward to the MODD and HDD.