GE LOGIQ 400 - Page 476

GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
TM
8–38 OPTIONS
REV 5
8–3–10 Operational Check–out (Continued)
d. Press key to select the Set Up Menu. The Set Up Menu is displayed on the CRT monitor screen as shown
in ILLUSTRATION 8–42.
SET UP MENU
ILLUSTRATION 8–42
e. Select the System Paramtr section using the or key of Sub Menu Select keys. The System Paramtr
selection is displayed in reverse video as shown in ILLUSTRATION 8–42.
f. Press key to select the System Parameter Set-Up Menu. The system parameter set-up menu is dis-
played on the CRT monitor screen as shown in ILLUSTRATION 8–43.
SYSTEM PARAMETER SET-UP MENU (1/6)
ILLUSTRATION 8–43