GE MEDICAL SYSTEMS
2127661
LOGIQ 400 SERVICE MANUAL
FUNCTIONAL CHECKS
4–19
REV 1
4–3–3 Utility Menu (Continued)
(C) TROUBLE IMAGE SAVE/LOAD/DISPLAY
This saves the trouble image recorded in the Hard Disk into the MO (Magneto Optical) Disk. This also loads the
image data saved in the MO Disk into the Hard Disk and displays the trouble image selected on the CRT monitor
by using the image recall function.
Note
Press and hold the Control key and press W to save the trouble image into the hard disk. You can
save the maximum 8 images into the hard disk.
Note
To save the trouble image into the hard disk, the optional VIPB Assy must be installed on the console
instead of VIDO Assy. Otherwise, the message ”This function is not available.” will be displayed on the
CRT monitor screen.
Type 3 and then press Return key when the Utility Menu is displayed. The following screen is displayed.
TROUBLE IMAGE SAVE/LOAD/DISPLAY (a)
ILLUSTRATION 4–16
To Next Page
Loading...
