DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 3 LOGIQ E10 Setup 3 - 39
Installing a Software Option (cont’d)
7.) Import the Option String from the media.
8.) Press Save to save the new setting.
9.) Restart to save and activate the settings and adjustments you have done so far.
Figure 3-25 SW Option Import
Option keys file can be imported from Media (CD/DVD,
USB) or the Service Folder.
There is an Import button on the Utility > Admin >
System Admin menu.
To Next Page
Loading...
