DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 7 Diagnostics/Troubleshooting 7 - 27
Data Transfer
Data Transfer provides a way to do the following:
• View information about past transfers of (APM) information.
• Set up automatic/scheduled transfer of allowed data files from the LOGIQ E10 to the server.
• Manually transfer data files allowed data files from the LOGIQ E10 to the server.
The information on Data Transfer is available to all service class licenses.
To access Data Transfer, select Utility (second page) > Service > Utilities > Data Transfer.
Figure 7-16 Data Transfer
This table shows all the elements available on Data Transfer with descriptions.
Table 7-8 Data Transfer
Element DESCRIPTION
Type of Upload
Type of log file. For example, Incremental Logs or Full Logs. Monitoring Logs,
System Logs, and Windows Logs are incrementally transferred when automatic
transfer is enabled. To enable automatic transfer, navigate to System Admin and,
under Service, check Enable Automatic Request for Service.
Upload Permission Whether the permission to upload the log file is allowed or not.
Last Upload Status Whether the last log file upload was successful or not.
Last Upload Attempt Date and time the last log file upload was attempted.
Last Successful Upload Date and time the last log file was successfully uploaded.
Scheduler
When selected, enables the related day selections. For example, All Days,
Monday, and Tuesday.
Save Settings Saves the information.
Send All Manually send the selected log files to the server.
To Next Page
Loading...
Need help?
General
