DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
9 - 52 Section 9-20 - Hardware Kit
30.)
Freedriv Cross Recessed Pan Head Machine
Screw_M3-0.5_ X12mm Long Zinc Plated
Steel_RoHS Fastener
BEP5 cable connectors
63.)
Screw for Thermoplastics Phillips Head with Washer
-WH5411- Dia. 4.0, Length 8
Side Covers; removable fan tray cover
64.)
Locking Post Kit Bulkhead board; BEP5 I/O board
65.)
Hex Standoff M3 x 5, with 6.5 long M3 Male Thread Bulkhead plate
66.)
Cross Recessed, PHILLIPS, Pan Head Machine
Screw, ASME B18.6.3 TYPE I, #6-32 X 1_2 Inch
Long, Stainless Steel 18-8, RoHS
BEP5 MB
67.)
Plastic snap rivet, Black. Hole 4.1 to 4.2mm.
Thickness 4.5 to 5.5mm
BEP5 fan
68.)
Cross Recessed Pan Head Tapping Screw, ST 4,2
X 13mm Long, Steel, Zinc Plated, RoHS Fastener
Palm rest
69.)
Cross Recessed Pan Head Tapping Screw, ST 4,8
X 19mm Long, Steel, Zinc Plated, RoHS Fastener
Foot rest
70.)
Cross Recessed Pan Head Tapping Screw, ST 4,8
X 25mm Long, Steel, Zinc Plated, RoHS Fastener
Speaker assy
71.)
Cross Recessed Pan Head Tapping Screw, ST 4,8
X 32mm Long, Steel, Zinc Plated, RoHS Fastener
Foot rest
72.)
Cross Recessed Pan Head Tapping Screw, ST 4,8
X 50mm Long, Steel, Zinc Plated, RoHS Fastener
Foot rest
74.)
Spacer round, AA5010-60-08.0-25 Pedal rod assy
Table 9-22 Box 1 of P/N 5310019-2 Hardware Kit Compartment Contents
Number Thumbnail Contents Where Used
To Next Page
Loading...
